Tutorial: How to connect Super Nova






 

 

Super Nova connection visual guide:

Basic Operations

Power On

Toggle the mode switch to the corresponding position and press the Home button

Power Off

Toggle the mode switch to the Off position

Standby

The controller will automatically power off if there is no operation while in connection status for 10 minutes.

Wake Up

Press the Home button to wake up the controller.

Low Battery

When the battery is below 15%, the RGB strips will flash red.

Charging

You can charge the controller via the Type-C port or the charging station.

When charging while the controller is off, the RGB strips will indicate the charging progress with a breathing light effect.

 

Connection Status

Status

Channel Indicator

Description

Connection Successful

Solid

Device connected successfully.

Pairing Status

Flash Rapidly

In pairing status, it can be discovered and connected by new devices.

Reconnecting Status

Flash Slowly

In reconnecting status, it can automatically connect to the last successfully connected device.

Press and hold to force switch to pairing status.

 

Platform and Mode

Platform

Mode Switch Position

Mode

Switching Method

PC/Switch/Android

2.4G Mode

 

Receiver

Toggle to receiver mode position.

PC/Switch/Android

Any Mode

Wired

Connect devices via wired connection in any mode.

PC/Android/iOS

Bluetooth Mode

 

DS4

Toggle to Bluetooth mode position and hold  for two seconds.

Switch/iOS

Bluetooth Mode

 

Switch

Toggle to Bluetooth mode position and hold  for two seconds.

Android

Bluetooth Mode

 

Android

Toggle to Bluetooth mode position and hold  for two seconds.

 

Windows Connection Tutorial

Receiver Connection

Insert the included receiver into the device's USB port. Toggle the controller's mode switch to the 2.4G mode  and press the Home button to power on. Wait for the controller to connect.

* If the connection is unsuccessful, press the pairing button on the receiver and hold  on the controller to re-enter pairing status.

Wired Connection

Connect the controller to the computer using a Type-C cable.

Bluetooth Connection

1. Toggle the controller’s mode switch to Bluetooth mode  and press the Home button to power on.

2. Hold until the channel indicator 2, 3, and 4 flashes quickly. Find “Wireless Controller” in the device’s Bluetooth list and click to connect.

* If the connection is unsuccessful, press and hold  on the controller to re-enter pairing status.

 

Switch Connection Tutorial

1. On the Switch main menu, go to “Controllers”-“Change Grip/Order”.

2. Toggle the controller’s mode switch to Bluetooth mode and press the Home button to power on. Hold  until the channel indicator starts flashing up and down rapidly, and wait for the connection.

* If the connection is unsuccessful, press and hold  on the controller to re-enter pairing status.

 

Android Connection Tutorial

1. Toggle the controller’s mode switch to Bluetooth mode and press the Home button to power on. Hold  until the channel indicator 3 and 4 starts flashing rapidly.

2. Find “GameSir-Nova Pro” in the device’s Bluetooth list and click to connect.

* If the connection is unsuccessful, press and hold  on the controller to re-enter pairing status.

 

iOS Connection Tutorial

1. Toggle the controller’s mode switch to Bluetooth mode and press the Home button to power on. Hold  until the channel indicator 2, 3, and 4 starts flashing rapidly.

2. Find “DUALSHOK 4 Wireless Controller” in the device’s Bluetooth list and click to connect.

* If the connection is unsuccessful, press and hold  on the controller to re-enter pairing status.

 

Calibration

Sticks & Triggers

1. Set the trigger to long pull position. Hold  to enter the calibration. The RGB strips will slowly flash white during entry.

2. At this point, push both sticks fully to their limits and rotate them 2-3 times. Press the trigger fully down 3 times. Finally, press to exit. The RGB strips will return to their normal state.

Gyroscope

Place the controller on a stable, flat surface. Hold , and the gyroscope will automatically start the calibration. During the calibration, the RGB strips will flash red and blue alternately. When the RGB strips returns to their original lighting effect, the calibration is complete.