How to Use the GameSir Kaleid Flux
XBOX-licensed RGB controller
Visão geral do produto
Principais recursos
- • Hall Effect sensing sticks
- • Precision-tuned Hall Effect analog triggers
- • Two extra buttons
- • Fully software-customizable
Especificações técnicas
- • Working Platform: XBOX Series X|S, XBOX One, Windows 10/11 and Steam
- • Connection: Wired, 3m detachable USB-C cable
- • Weight: 213 g / 0.47 lbs
- • Supported Software: GameSir Nexus app
Requisitos do sistema
XBOX
XBOX One, XBOX Series X|S Wired
Windows
Windows 10/11 Wired
Primeiros passos
- When the controller is On and there is no operation within 10 minutes, it will go to sleepautomatically and the LED strips will go out.
- When the controller is On, it will go to sleep after the XBOX button is held for 5s.
- When the controller goes to sleep mode, you can weak up the controller by pressing theXbox/A/B/X/Y button.
Solid White=Connected
- Hold the M button+D-pad's Up/Down toIncrease/Decrease the Master Volume.(11 levels in total) *There will be a beep when adjusting tothe maximum/minimum level.
- Hold the M button+D-pad's Left/Right toIncrease game volume while Decreasingvoice chat volume/Decrease game volumewhile Increasing voice chat volume.
*There will be a beep when adjusting to themaximum/middle/minimum level.
- Microphone Mute Function: When your headphone/earphone is plugged in, double pressthe M button, the Microphone Mute Light will become solid red and the Microphone MuteFunction is On. Double press again the M button, the Microphone Mute Light will go out andthe Microphone Mute Function is Off (Default).When the Microphone Mute Function is On, hold the M button to temporarily turn off theMicrophone Mute Function, and release the M button to restore Microphone Mute Functionto On.
NO PRESET BUTTON VALUES (Can be programmed to A/B/x/y/LB/RB/LT/RT/Ls/Rs/D-pad/Menu/View/Share Button)
- Set L4/R4 button value: Hold the M+L4/R4 buttons simultaneously for 3s. When the Xboxbutton blinks slowly, press the button you want to map to L4/R4. The XBOX button turnssolid to indicate L4/R4 button value is set.
- Cancel L4/R4 button value: Hold the M+L4/R4 buttons simultaneously for 3s. When theXbox button blinks slowly, press L4/R4 button. The XBOX button turns solid to indicate L4/R4button value is canceled. *In setting mode, after 10s of inactivity the controller will automatically exit the settingmode and the button values will remain unchanged.
I. Hold the View+ Menu + XBOX buttons until the USB-C cable is inserted into the PC'sUSB port. The XBOX button will slowly blink white. 2. Ensure that LT & RT and the left & right sticks are not touched. Then Press the A button. The XBOX button will go out. 3. Press LT & RT to their maximum travel. Rotate the sticks at their maximum angles for 3times. Press the A button. The XBOX button becomes solid white to indicate the calibrationis over. 4. After the calibration is over, it's required to unplug and re-plug the controller before using.
If the controller encounters issues such as being unable to power on or off properly, you can Hold View Button + Menu Button + M Button till the logo Button blink. This action will reset the profile and all the settings of the controller.
Tutoriais avançados
Advance Tutorials
Hair Trigger
Enable/Disable hair triggerAfter hair trigger mode is on:The left/right LED strip will automatically light up whenthe LT/RT button is pressed.*The setup will still be saved after restart.
Light Effects
Switch among 4 light effects
*The setup will still be saved after restart.
LED brightness
Increase/Decrease LED brightness5 levels, default is the brightest.
*The setup will not be saved after restart.
Profile Switch
Press the M + A/B/x/Y buttons in sequence to switch to the corresponding profile. M + Y= Default M + A= Profile 2 M + B= Profile1 M+ X= Profile 3
FAQ
It supports XBOX Series X|S, XBOX One X|S, Windows 10/11 and Steam.
Wired, with a 3m detachable USB-C cable.
Yes, Hall Effect analog triggers with GameSir precision-tuned tech, with 100% response area and best-in-class. There’s also a quick switch to hair trigger mode by holding M + LT / RT for 2s, perfect for FPS and action games.
There are two versions of Kaleid series controller: Kaleid with microswitches buttons and Kaleid Flux with membrane buttons. You can choose the one you prefer.
4, 2 in the grips and 2 in the triggers.
Algorithm-optimized Hall Effect sticks, with 0 Fluctuation, 0 Deviation and 0 Circularity error. You can even easily set 0 Dead,zone and switch between Default and the exclusive “Raw” mode via the GameSir Nexus software. The anti-friction glide rings also provide super-smooth stick control.
You can create 3 controller profiles by mapping buttons, fine-tuning sticks & triggers, configuring vibration and light effects.
In the GameSir Nexus app, a diverse range of custom light effect sets is available for gamers to choose from based on their moods and game types. Additionally, gamers have the option to combine various light effects according to their preferences.
The two controllers are from the same series and are very alike despite nuanced variations. The Kaleid is equipped with microswitch face buttons, while the Kaleid Flux features membrane face buttons. Additionally, they have diverse printed circuit board (PCB) trace patterns and different default colors for their RGB light strips.
Este artigo foi útil?
Conte-nos se você achou útil ou se precisa de mais informações.