How to Use the GameSir X5 Lite
One of the best mobile controllers with the most budget-friendly price.
製品概要
主な機能
- • Precise and Anti-drift: GameSir™ Hall Effect Sticks
- • Ergonomic and Lightweight Design for Extreme Comfort
- • Cushioned and Durable Membrane Triggers and Buttons
- • Software customization
技術仕様
- • Working Platform: Android and Other Devices
- • Connection: Built-in Type-C wired connection
- • Weight: 135.4g / 0.30lbs
- • Supported Software: GameSir app
システム要件
Android
Android 8.0 or above Built-in Type-C
Windows
Windows 10/11 Wired
はじめに
Connection
Connection Status
Some Android phones need to enable the OTG function to power and use the controller.
| Operation | Description |
|---|---|
| Power On | The controller will power on automatically when connected via the moveable Type-C connector. |
| Standby | The controller will automatically power off if no operation is detected within10 minutes while connected. In standby mode, press any A/B/X/Y/Home button to power on. |
| Platform | Mode | Indicator | Switch Method |
|---|---|---|---|
| Android/Other Devices | Switch | Red | Press and hold the Viewand Menu buttons for 2seconds to switchbetween Switch modeand Android mode |
| Android | Android | Dark Blue | Press and hold the Viewand Menu buttons for 2seconds to switchbetween Switch modeand Android mode |
| Android | G-Touch | Light Blue | Via GameSir APP |
-
Connect the phone, then press and hold Menu Button + View Button + Logo Button on the controller for 3 seconds until theindicator flashes, indicating successful entry into calibration mode.
-
In calibration mode, follow these steps to complete the calibration:
-
a) Rotate the sticks to their maximum angle three times, then allow them to return to theinitial position naturally.
-
b) Press B Button to complete and exit calibration mode.
Maintain a consistent speed during calibration to avoid data collection errors.
If the sticks on the controller are functioning normally, do not calibrateunnecessarily.
This controller currently doesn’t have a reset function for combination keys. If you want to reset the controller, you can do so in the GameSir app by resetting the configuration file.
-
Click controller icon area on the GameSir APP main interface.
-
Click "Restore to default".
-
Click"Confirm", it will reset the profile of controller to factory settings.
Gamesir-X5 Lite features a swappable silicone pad design on both sides of theType-C port, allowing users to customize the pad thickness based on their device. When installing, ensure the thicker side of the silicone pad faces upward and thethinner side faces downward.
- For devices without a protective case, use the thick silicone pads.
- For devices with a protective case, use the thin silicone pads or hole-covering silicone pads.
- Ensure the edges of the silicone pads fit securely against the controller toprevent them from falling off.
上級チュートリアル
Advanced Tutorial
Switch Mode
Switch between Switch mode and Android mode.
Adjust Volume
Increase/decrease system volume, onlyworks in Android mode.
Enable Turbo Function
Press and hold the M button, then click thebutton you want to enable the Turbo functionfor. This will activate Turbo for that button.
Buttons that support Turbo function: A/B/X/Y/LB/RB/LT/RT
Repeat the action to disable Turbo for thecorresponding button.
- To clear all Turbo settings, press and holdthe M button and Home button for 2 seconds.
Switch Layout
Swap the button values of A-B and X-Y. Theindicator will flash white twice to confirmsuccessful activation.
Activate Screenshot
You can activate the screenshot function.Double press and hold the M button to enablecontinuous pressing for the correspondingfunction.
FAQ
The X5 Lite is compatible with iOS and Android devices featuring a Type-C connection, with a length range between 105-213mm (4.13-8.39 inches).
It uses a built-in Type-C wired connection, ensuring ultra-low latency.
No, the X5 Lite does not contain a battery as it is powered directly by your phone.
Yes, the X5 Lite supports pass-through charging, allowing you to play and charge your device simultaneously.
The GameSir™ Hall Effect sticks use non-contact magnetic sensors to ensure they never wear down, preventing stick drift.
No, the X5 Lite is equipped with cushioned and durable membrane triggers, designed for comfort and quiet operation.
Yes, you can easily swap the button layouts by pressing and holding M button + A Button for 2 seconds.
Yes. Buttons that support the Turbo function includes: A/B/X/Y/LB/RB/LT/RT.
The X5 Lite weighs approximately 135.4g/0.30lbs. Its lightweight design ensures comfort during extended gaming sessions without causing fatigue.
近日公開...
この記事は役に立ちましたか？
役に立ったかどうか、または追加情報が必要かどうかをお知らせください。