How to Use the GameSir Tarantula Pro XBOX
The best symmetrical controller on XBOX
製品概要
主な機能
- • Wired Symmetric Esports Controller Designed for XBOX
- • The Anti-Stick Drift Solution: GameSir Mag-Res™ TMR Sticks
- • Dual-Mode Trigger Stops: Hall Effect Analog/Micro Switch
- • Fully software-customizable
技術仕様
- • Working Platform: XBOX Series X|S, XBOX One, Windows 10/11 and Steam
- • Connection: Wired, includes a 3m detachable USB-C cable in the box
- • Weight: 235g/0.52lbs
- • Supported Software: GameSir exus app
システム要件
Windows PC
Windows 10/11 Wired
XBOX
XBOX One, XBOX Series X|S Wired
はじめに
| Status | description |
|---|---|
| Connect | Use the included USB-C cable to connect the controller to your device. Press the XBOX button briefly to power on. A solid XBOX indicator indicates a successful connection. |
| Sleep | If the controller is inactive for ten minutes or if the XBOX button is pressed and held for 5 seconds, the controller will enter sleep mode. |
| Wake-up | Pressing the A/B/X/Y or XBOX button while the controller is in sleep mode will wake it up. |
Sticks & Triggers
1.Set the triggers to long-travel mode. Hold View Button + Menu Button + XBOX Button for 2 seconds to enter calibration mode. The Home light will flash slowly in white during this process.
2.Ensure the triggers and sticks are not being touched. Press A Button once.
3.Rotate both sticks in full circles 2-3 times. Fully press both triggers three times. Finally, press A Button to exit. The Home light will return to its original light effect.
Gyroscope
Place the controller horizontally on a flat surface, then long-pressView Button + Home Button + Down(A)Button for 3 seconds. At this point, the Home indicator willflash red and blue alternately rapidly. Calibration is complete when the Home indicator returns to its mode color.
When the controller becomes unresponsive or encounters abnormal conditions, press and hold VIew+Menu+M for 3 seconds to reset the controller configuration.
上級チュートリアル
Mappable Button Setting
While holding the M button,
press thedesired mappable button(L4/R4/C1/c2/c3/c4/T1/T2/T3) once toenter setting mode. The XBOX indicatorwill flash.
Press the button to assign to thatmappable button, and it will be set andsaved automatically
- If you exit the setting process withoutpressing any button, the assigned valueof that mappable button will be cleared.
Hair Trigger Mode
Press and hold M and LT/RT for 2 seconds toturn on and off the hair trigger mode.The trigger must be in the long travel mode
Microphone Mute Function
With headphones connected,double-click the M button to activate themute function.
The microphone mute indicatorwill show a solid red light whenthe function is enabled. Repeatthe same steps to disable it.
While the mute function is active, holdingthe M button will temporarily unmute.Releasing it will return the microphone tomute.
Light Setting
Lighting Effects
While holding the M button, toggle the leftjoystick to the left/right to cycle the lighteffect among Solid Color, Breathing, Fantasy(default), Rainbow, Radar, and Off
Brightness
While holding the M button, move the leftjoystick up/down to increase/decrease thelight brightness
Configuration Switching
Configuration
While holding the M button, toggle the rightjoystick upward to switch the controller to thedefault configuration .The channel lights are shown as --X--(Indicator light 3 flashes)
Configuration 1
While holding the M button, toggle the rightjoystick upward to switch the controller to thedefault configuration .The channel lights are shown as -X-X-(Indicator light 2,4 flashes)
Configuration 2
While holding the M button, toggle the rightjoystick upward to switch the controller to thedefault configuration .The channel lights are shown as X-X-X(Indicator light 1,3,5 flashes)
Configuration 3
While holding the M button, toggle the rightjoystick upward to switch the controller to thedefault configuration .The channel lights are shown as XX-XX(Indicator light 1,2,4,5 flashes)
Mic Settings
Volume Adjustment
Hold the M button + the D-pad up/down toincrease/decrease the main volume(11 levels in total)
-
A sound cue will be provided whenadjusting to the maximum or minimum level.
-
Requires headset connection.
Voice Balance Adjustment
Hold the M button + the D-pad left/right toincrease game volume (while decreasingvoice volume)/ decrease game volume(while increasing voice volume).
- A sound cue will be provided whenadjusting to the maximum, medium orminimum level.
- Only works on XBOX consoles.
FAQ
It supports XBOX Series X|S, XBOX One X|S, Windows 10/11, and Steam.
Wired, includes a 3m detachable USB-C cable in the box.
The GameSir Mag-Res™ TMR sticks combine the smooth, linear control with magnetic anti-drift precision for long-lasting, responsive control.
Yes, it features Hall Effect analog triggers that include Micro Switch trigger stops for quick-switching between linear and instant clicky response.
It has a total of 4 rumble motors, one in each grip and trigger.
It has nine mappable buttons in total.
Yes, it supports customization through the GameSir Nexus software on both PC and XBOX.
この記事は役に立ちましたか？
役に立ったかどうか、または追加情報が必要かどうかをお知らせください。