How to Use the GameSir Nova Lite
Budget Friendly choice on PC
Descripción del producto
Características principales
- • Anti-drift GameSir™ Hall Effect sticks
- • Tri-mode connectivity
- • Multi-platform compatibility
- • Fully software-customizable
Especificaciones técnicas
- • Working Platform: PC, Steam, Android, Switch
- • Connection: Bluetooth, Wireless Dongle, Wired
- • Weight: 205 g / 0.45 lbs
- • Supported Software: GameSir app
Requisitos del sistema
Windows
Windows 10/11 Bluetooth, Wireless Dongle, Wired
Android
Android 8.0 or above Bluetooth
Switch
Switch/Switch 2 Bluetooth, Wireless Dongle, Wired
Primeros pasos
| Indicator | Instructions |
|---|---|
| Slow Blink | [Reconnection Status] 1. When in reconnection status, the controller can only beconnected to the last paired device in the current mode. 2. To forcibly switch to pairing mode, press and hold theScreenshot and Home buttons for 3 seconds. |
| Fast Blink | [Pairing Status] 1. The controller is in pairing mode and can be discovered bydevices. 2.Once paired with a device in the current mode, the controllerwill automatically enter reconnection status each time itpowers on. |
| Steady | [Connected Status] 1. To power off the controller, press and hold the Home buttonfor 5 seconds. |
| Description | Operation |
|---|---|
| Power on | Short press Home Button or combination buttons (A/B/X/Y + Home) |
| Manual Power Off | Press Home Button for 5 seconds |
| Auto Power Off | No activity: 10 minutes Not connected in pairing mode: 1 minute Not connected in reconnection mode: 3 minutes |
| Charging | When the controller is charging while powered off, the Home indicator breathes with different colors to indicate the charging progress, divided into five intervals: Red (0%-25%), Orange(25%-50%), Yellow(50%-75%), Green(75%-90%), and a 2-second green-off(90%-100%). |
| Low Battery Warning | When the controller’s battery level is below 10%, the Home indicator flashes orange twice per second. |
| Color | Mode | Connection Method | Supported System Platforms |
|---|---|---|---|
| Blue | |||
| Manual Power Off | Press Home Button for 5 seconds | ||
| Auto Power Off | No activity: 10 minutes Not connected in pairing mode: 1 minute Not connected in reconnection mode: 3 minutes | ||
| Charging | When the controller is charging while powered off, the Home indicator breathes with different colors to indicate the charging progress, divided into five intervals: Red (0%-25%), Orange(25%-50%), Yellow(50%-75%), Green(75%-90%), and a 2-second green-off(90%-100%). | ||
| Low Battery Warning | When the controller’s battery level is below 10%, the Home indicator flashes orange twice per second. |
-
Insert Nova Lite-Dongle into the USB port of the device to be connected, then press thepairing button on the Nova Lite-Dongle. At this point, the receiver indicator will flash rapidly,indicating it has entered pairing state.
-
When the controller is in the power-off state, briefly press X+Home until the green lightflash rapidly, then release the buttons.
-
At this point, the controller enters the pairing state in receiver mode, waiting for thecontroller to pair with Nova Lite-Dongle.
-
After a successful connection, the indicator of Nova Lite-Dongle will turn solid, and thegreen light of the controller will turn solid too.*Press and hold the controller's screenshot button and Home button for 3 seconds toforcibly switch the controller to pairing mode.
- If you have any other questions during use, it is recommended to refer to the user manualfor the Gamesir Nova Lite Controller for assistance.
WIRED CONNECTION
- After a successful connection, the controller's indicator stays green.
BLUETOOTH CONNECTION
-
With the controller powered off, briefly press the B+Home buttons until the Home indicatorflashes blue, then release the buttons.
-
Open the PC's Bluetooth list, select the device: Wireless Controller, and click connect.
-
When the Home indicator displays a steady blue light, it indicates a successful connection.Reconnection: If the controller mode remains unchanged, simply power on by pressing thecontroller's Home button next time to reconnect to the device.
-
If you can't detect the controller's Bluetooth signal, try deleting Wireless Controller" fromyour PC's Bluetooth paired devices.
-
If you encounter difficulties with pairing, refer to the connection status list above.
-
If the connection is unsuccessful, press and hold Screenshot Button + Home Button on the controller to re-enter pairing status.
-
On the Switch main screen, go to "Controllers", then select "Change Grip / Order", and waiton this screen.
-
With the controller powered off, briefly press the Y+Home buttons until the Homeindicator rapidly flashes red, then release the buttons and wait for the connection.
-
A steady red Home indicator indicates a successful connection.Reconnection: If the controller mode remains unchanged, simply power on by pressing thecontroller's Home button next time to reconnect to the console.
-
If you encounter difficulties with pairing, please refer to the connection status list above.
-
If the connection is unsuccessful, press and hold Screenshot Button + Home Button on the controller to re-enter pairing status.
-
With the controller powered off, briefly press the A+Home buttons until the Homeindicator rapidly flashes yellow, then release the buttons.
-
Open your phone's Bluetooth list, select the device: Gamesir -Nova Lite, and clickconnect
-
When the Home indicator displays a steady yellow light, it indicates a successfulconnection. Reconnection: If the controller mode remains unchanged, simply power on bypressing the controller's Home button next time to reconnect to the device.
-
If you encounter difficulties with pairing, please refer to the connection status list above.
-
If the connection is unsuccessful, press and hold Screenshot Button + Home Button on the controller to re-enter pairing status.
-
With the controller powered off, briefly press the B+Home buttons until the Home indicatorrapidly flashes blue, then release the buttons.
-
Open the mobile device's Bluetooth list, select the device: Wireless Controller, and click connect.
-
When the Home indicator displays a steady blue indicator, it indicates a successfulconnection.
Reconnection: If the controller mode remains unchanged, simply power on by pressing thecontroller's Home button next time to reconnect to the device.
-
If you can't detect the controller's Bluetooth signal, try deleting "WirelessController" from your mobile device's Bluetooth paired devices.
-
If you encounter difficulties with pairing, refer to the connection status list above.
-
If the connection is unsuccessful, press and hold Screenshot Button + Home Button on the controller to re-enter pairing status.
I. When the controller is turned on, hold View Button + Logo Button + Menu Button the blinks white slowly. 2. Press LT & RT to their maximum travel 3 times. Rotate the sticks at their maximum angles3 times. 3. Press the A button. The Home button will become solid white to indicate the calibration is over.
- If the controller encounters issues such as being unable to power on or off properly, you can Hold Home Button + Menu Button till the logo Button blink. This action will reset the profile and all the settings of the controller.
2.If you encounter unresponsive controller buttons, you can use a small object similar to thesize of a paperclip to press the Reset button inside the circular hole on the back of thecontroller. This will force the controller to power off.
Tutoriales avanzados
Turbo Settings
Speed: 20HZThe configurable buttons :A/B/x/Y/LB/LT/RB/RT.
1 . Set Turbo: Hold the M button and then press the button you want to set for turbo toenable turbo function. Repeat this action to disable turbo.
2 . Clear turbo function for all buttons: Double-click the M button.
Turbo Settings
3 . When the turbo button is triggered, the Home indicator flashes red twice every second.
- This setting will be preserved even after the controller is restarted.
Button Combinations
Vibration Intensity
Increase/Decrease grips' vibration intensity 5 gears, 1st gear vibration Off, 2nd 25%, 3rd 50%, 4th75% (default), 5th 100%
- The setup will still be saved after restart
Switch Modes
-
Supported in Receiver and Wired mode onlySwitch among XInput, NS Pro and Android modeand fix the mode used for this connection way(Receiver/wired).
When connecting in the same way(Receiver/Wired), it will still be the switched mode. -
After holding the Home button for 10s to turn offthe controller, the controller will automaticallydetect the platform as before upon powering on.
Stick Deadzone Mode
Enable/Disable left/right stick's 0 deadzone mode
- The setup will still be saved after restart
Switch Layout
Interchange the key value of A-B, X-Y
- The setup will still be saved after restart
FAQ
It supports XBOX Series X|S, XBOX One X|S, Windows 10/11 and Steam.
Wired, with a 3m detachable USB-C cable.
Yes, Hall Effect analog triggers with GameSir precision-tuned tech, with 100% response area and best-in-class. There’s also a quick switch to hair trigger mode by holding M + LT / RT for 2s, perfect for FPS and action games.
There are two versions of Kaleid series controller: Kaleid with microswitches buttons and Kaleid Flux with membrane buttons. You can choose the one you prefer.
4, 2 in the grips and 2 in the triggers.
Algorithm-optimized Hall Effect sticks, with 0 Fluctuation, 0 Deviation and 0 Circularity error. You can even easily set 0 Dead,zone and switch between Default and the exclusive “Raw” mode via the GameSir Nexus software. The anti-friction glide rings also provide super-smooth stick control.
You can create 3 controller profiles by mapping buttons, fine-tuning sticks & triggers, configuring vibration and light effects.
In the GameSir Nexus app, a diverse range of custom light effect sets is available for gamers to choose from based on their moods and game types. Additionally, gamers have the option to combine various light effects according to their preferences.
The two controllers are from the same series and are very alike despite nuanced variations. The Kaleid is equipped with microswitch face buttons, while the Kaleid Flux features membrane face buttons. Additionally, they have diverse printed circuit board (PCB) trace patterns and different default colors for their RGB light strips.
¿Te ha resultado útil este artículo?
Cuéntanos si te ha sido útil o si necesitas más información.