Cyclone 2 dongle and controller firmware update guide

Controller firmware update with Gamesir Connect:

Cyclone 2 Manual Firmware Upgrade Tutorial:

First open the GameSir Connect on the PC without connecting controller, then hold the logo + menu buttons while connect to PC with a USB cable, then you could unlock manual upgrade. This method is for players who cannot complete the firmware upgrade within GameSir Connect.

Cyclone 2 dongle update tutorial：If you have the issues with dongle connection .

To update the dongle you need to first power off your controller by holding  logo  button for 5 seconds, unplug the dongle, open Gamesir Connect app, press and hold pairing button on the dongle and plug into PC. If done correctly you will see update window and wait for process to finish.

Cyclone 2 firmware update with update tool:

1.dongle update: 

Step 1:press the pairing button on the dongle for 5s until the indicator light goes off and the device status on the update tool shows online.

Step 2: Click downlaod and wait for the process to finish

Click here to download the dongle firmware updater

Please Click here to watch the tutorial for Cyclone 2 dongle firmware update

 

2. controller firmware update:make sure other apps such as Gamesir Connect) is closed.

Step 1: Hold the [Logo] + [=] buttons whle plugging in the controler to enter update mode

 Step 2: Click "Install Firmware" and wait for it to finish before unplugging and replugging. Note:Compatible with Cyclone 2 dongle firmware 1.19 & 1.20.

Click here to download the  firmware updater

Please Click here to watch the tutorial for Cyclone 2  firmware update