How to Use the GameSir Tarantula Pro 8K
Be Competitive, Be Pro. For Tarantula Pro 8K/Tarantula Pro 8K MenaRD Edition
Aperçu du produit
Fonctionnalités clés
- • Gen-2 GameSir Mag-Res™ TMR Sticks
- • Hall Effect Analog Triggers with Clicky Micro Switch Trigger Stops
- • 8000Hz Ultra-Fast Response and 0.5ms Ultra-Low Latency Connection
- • Fully software-customizable
Spécifications techniques
- • Working Platform: PC
- • Connection: Wired, includes a 2m detachable USB-C cable in the box
- • Weight: 180g/0.40lbs
- • Supported Software: GameSir Connect app
Configuration requise
Windows PC
Windows 10/11 Wired
Premiers pas
| Status | description |
|---|---|
| Connection | Insert the data cable at the top of the controller into the corresponding device. A steady channel light indicates successful connection |
| Standby | The controller will automatically enter the standby mode after 10 minutes of inactivity while connected |
| Wake-up | Pressing the Home button can wake it up |
| View Mode | Pressing and holding the M button allows you to view the current controller mode |
- Pressing and holding the M button after connection allows you to view the indicationcolor of the current controller mode
- The controller mode is automatically recognized by default; manual mode switching willdisable the auto-recognition function
- Press and hold the Home button for 10 seconds to restore the auto-recognition function
| Channel Indicator | Mode | Mode Indicator Color | Connection Method |
|---|---|---|---|
| PC | XBOX Mode | Green | Press and hold Home + X Button for 2 seconds |
| Switch | Switch Mode | Red | Press and hold Home + Y Button for 2 seconds |
| Android | Android Mode | Yellow | Press and hold Home + A Button for 2 seconds |
Sticks & Triggers
1.Set the triggers to long-travel mode. Hold View Button + Menu Button + Home Button for 2 seconds to enter calibration mode. The Home light will flash slowly in white during this process.
2.Ensure the triggers and sticks are not being touched. Press A Button once.
3.Rotate both sticks in full circles 2-3 times. Fully press both triggers three times. Finally, press A Button to exit. The Home light will return to its original light effect.
Gyroscope
Place the controller horizontally on a flat surface, then long-pressView Button + Home Button + Down(A)Button for 3 seconds. At this point, the Home indicator willflash red and blue alternately rapidly. Calibration is complete when the Home indicator returns to its mode color.
Press and hold the Home + Menu buttons for5 seconds to reset the controller's currentconfiguration to the default settings
Tutoriels avancés
Remappable Button Settings
While holding the M button, press the desiredremappable button(L4/R4/c1/c2/c3/c4/T1/T2/T3) to enter therecording mode for that button.
The Homelight will flash upon entering.Press the button you want to record, andthen press the corresponding remappablebutton again to save and exit.
-
Up to 32 steps can be recorded at most.
-
If you exit without pressing the desiredbutton during setup, the button value for thatremappable button will be cleared.
Turbo Setting
While holding the M button, press A/B/X/Y/LB/RB/LT/RT to cycle among TurboOff
- Turbo Level 1 - Turbo Level 2 - Turbo Level 3.
When holding a button with the Turbofunction enabled, the Home light will flashred rapidly.
- Double-click the M button to clear all turbosettings.
Button Combination
Hair Trigger
Press and hold M and LT/RT for 2 seconds toturn on and off the hair trigger mode.The trigger must be in the long travel mode
Turning On/Off Dead Zone
Press and hold the M button and press downthe left/right joystick for 2 seconds to turn onand off the dead zone of the corresponding joystick.
Button Layout
Interchange button values of A/B, X/Y*The setting will still be saved after a restart.
Light Setting
Lighting Effects
While holding the M button, toggle the leftjoystick to the left/right to cycle the lighteffect among Solid Color, Breathing, Fantasy(default), Rainbow, Radar, and Off
Brightness
While holding the M button, move the leftjoystick up/down to increase/decrease thelight brightness
Saturation
While holding the M button, press the Up/Down button of the D-Pad toincrease/decrease color saturation in theSolid Color, Breathing, and Radar modes.
Animation Speed
While holding the M button, press theLeft/Right button of the D-Pad todecrease/increase the animation speed ofthe Breathing, Fantasy, and Rainbow modes.
Configuration Switching
Configuration
While holding the M button, toggle the rightjoystick upward to switch the controller to thedefault configuration .The channel lights are shown as --X--(Indicator light 3 flashes)
Configuration 1
While holding the M button, toggle the rightjoystick upward to switch the controller to thedefault configuration .The channel lights are shown as -X-X-(Indicator light 2,4 flashes)
Configuration 2
While holding the M button, toggle the rightjoystick upward to switch the controller to thedefault configuration .The channel lights are shown as X-X-X(Indicator light 1,3,5 flashes)
Configuration 3
While holding the M button, toggle the rightjoystick upward to switch the controller to thedefault configuration .The channel lights are shown as XX-XX(Indicator light 1,2,4,5 flashes)
FAQ
The Tarantula 8K PC supports PC via wired connection.
It supports up to 8000Hz polling rate on wired connections.
The controller features Gen-2 TMR sticks. Compared to the first generation, they still use magnetic technology to eliminate physical contact, delivering long-lasting anti-stick drift reliability.
The dual-mode trigger stops allow switching between Hall Effect analog triggers and Micro Switch triggers.
We removed the heavy vibration motors and the battery to reach a weight of just 180g. This pure wired design reduces hand stress, so you can play longer without getting tired.
It has nine remappable macro buttons, including two extra bumpers (T1/T2), two lockable back buttons (R4 / L4) and five front buttons(C1/C2/C3/C4/T3), each supporting up to 32 steps macro recording.
The back button latches allow users to enable or disable the back buttons, helping prevent unintended inputs during gameplay.
Yes. It features a built-in 6-axis gyroscope for motion control.
Yes. It is compatible with GameSir Connect software, allowing users to customize button mapping, macros, and other settings.
Cet article vous a-t-il été utile ?
Dites-nous si vous l'avez trouvé utile ou si vous avez besoin de plus d'informations.