How to Use the GameSir T7 Pro Floral
Shine with it
Aperçu du produit
Fonctionnalités clés
- • Versatile Compatibility
- • GameSir™ Anti-Drift Hall Effect Sticks
- • Hall Effect Analog Triggers, with 2-Stage Trigger Stops
- • Fully software-customizable
Spécifications techniques
- • Working Platform: XBOX Series X|S, XBOX One, Windows 10/11 and Steam
- • Connection: Wired, 3m detachable USB-C cable
- • Weight: 217 g / 0.48 lbs
- • Supported Software: GameSir Nexus app
Configuration requise
XBOX
XBOX One, XBOX Series X|S Wired
Windows
Windows 10/11 Wired
Premiers pas
- When the controller is On and there is no operation within 10 minutes, it will go to sleepautomatically and the LED strips will go out.
- When the controller is On, it will go to sleep after the XBOX button is held for 5s.
- When the controller goes to sleep mode, you can weak up the controller by pressing theXbox/A/B/X/Y button.
Solid White=Connected
- Hold the M button+D-pad's Up/Down toIncrease/Decrease the Master Volume.(11 levels in total) *There will be a beep when adjusting tothe maximum/minimum level.
- Hold the M button+D-pad's Left/Right toIncrease game volume while Decreasingvoice chat volume/Decrease game volumewhile Increasing voice chat volume.
*There will be a beep when adjusting to themaximum/middle/minimum level.
- Microphone Mute Function: When your headphone/earphone is plugged in, double pressthe M button, the Microphone Mute Light will become solid red and the Microphone MuteFunction is On. Double press again the M button, the Microphone Mute Light will go out andthe Microphone Mute Function is Off (Default).When the Microphone Mute Function is On, hold the M button to temporarily turn off theMicrophone Mute Function, and release the M button to restore Microphone Mute Functionto On.
NO PRESET BUTTON VALUES (Can be programmed to A/B/x/y/LB/RB/LT/RT/Ls/Rs/D-pad/Menu/View/Share Button)
Set the macro button value: Press and hold the M button + L4/R4 button, and the Xboxindicator will start flashing slowly. Press the button you want to map to the macro button,and the XBOX indicator will return to a solid light, indicating that the macro button setting iscomplete.
- Within the setting mode, pressing the corresponding macro button will clear its button value.
Switch between long and short trigger pulls by togglingtrigger gear switch. After switching, gently press thetrigger fully down three times to automatically calibratethe pull distance.
I. Hold the View+ Menu + XBOX buttons until the USB-C cable is inserted into the PC'sUSB port. The XBOX button will slowly blink white. 2. Ensure that LT & RT and the left & right sticks are not touched. Then Press the A button. The XBOX button will go out. 3. Press LT & RT to their maximum travel. Rotate the sticks at their maximum angles for 3times. Press the A button. The XBOX button becomes solid white to indicate the calibrationis over. 4. After the calibration is over, it's required to unplug and re-plug the controller before using.
If the controller encounters issues such as being unable to power on or off properly, you can Hold View Button + Menu Button + M Button till the logo Button blink. This action will reset the profile and all the settings of the controller.
Tutoriels avancés
Advance Tutorials
Hair Trigger
Enable/Disable hair triggerAfter hair trigger mode is on:The left/right LED strip will automatically light up whenthe LT/RT button is pressed.*The setup will still be saved after restart.
Light Effects
Switch among 4 light effects
*The setup will still be saved after restart.
LED brightness
Increase/Decrease LED brightness 5 levels, default is the brightest.
*The setup will not be saved after restart.
Profile Switch
Press the M + A/B/x/Y buttons in sequence to switch to the corresponding profile. M + Y= Default M + A= Profile 2 M + B= Profile1 M+ X= Profile 3
FAQ
It supports XBOX Series X|S, XBOX One X|S, Windows 10/11, and Steam.
Wired, with a 3m detachable Type-C cable.
The GameSir™ Hall Effect sticks use non-contact magnetic sensors to prevent stick drift and ensure smooth control, providing an ultra lifespan of up to 5 million cycles.
Yes, it features Hall Effect analog triggers with two-stage trigger stops. You can switch between different trigger travel distances depending on the usage scenario. After switching, please press the trigger fully down three times gently to calibrate. It also includes a Hair Trigger mode, activated by holding M + LT/RT.
It has a total of 4 rumble motors, one in each grip and trigger.
It has 2 mappable back buttons.
Yes, it features a dynamic RGB lighting system, including RGB ABXY buttons, RGB stick rings, and an RGB D-pad.
Yes, it supports customization through the GameSir Nexus app.
Cet article vous a-t-il été utile ?
Dites-nous si vous l'avez trouvé utile ou si vous avez besoin de plus d'informations.