How to Use the GameSir G8+MFI
The most premium mobile controller for Type-C connection & MFi support.
Aperçu du produit
Fonctionnalités clés
- • Officially MFi Certified Controller
- • The Anti Stick-Drift Solution: GameSir™ Hall Effect Sticks
- • Precision-Tuned Hall Effect Analog Triggers
- • Software Customization Support
Spécifications techniques
- • Working Platform: iPhone, iPad, and Android
- • Connection: Built-in Type-C wired connection
- • Weight: 304 g / 0.67 lbs
- • Supported Software: GameSir app
Configuration requise
Android
Android 8.0 or above Built-in Type-C wired
iOS
iOS 13 or above Built-in Type-C wired
Windows
Windows 10/11 Wired
Premiers pas
*Some Android phones need to enable the OTG function to power and use the controller.
| Status | Description |
|---|---|
| Power On | The controller will automatically power on when connected to thedevice via the moveable Type-C connector. |
| Power Off | The controller will automatically power off when disconnected from thedevice. |
| Standby | The controller will automatically power off if no operation is detectedwithin 10 minutes while connected.In standby mode, press any A/B/X/Y/Home button to power on. |
Switch the controller mode based on your target platform.
| PLATFORM | MODE | INDICATOR LIGHT | SWITCHING METHOD |
|---|---|---|---|
| iOS | MFi Mode | White | Automatically switches when connected toan iOS device. |
| Android | Android Mode | Dark Blue | Automatically switches when connected to an Android device |
| Android | G-Touch Mode | Light Blue | Launch within the Gamesir app. |
| PC | XBOX Mode | Green | Automatically switches when connected toa Windows PC. |
-
Press and hold Three Dots Button + Menu Button+ Logo Button simultaneously to enter calibration mode.
-
The indicator light will flashwhite during this process. At this point, push both sticks all the way down to their limits and rotatethem 2-3 times. Press both triggers fully down 3 times.
-
Finally, press A Button to exit. The indicator lightwill return to its normal state, indicating that the calibration is complete.
This controller currently doesn’t have a reset function for combination keys. If you want to reset the controller, you can do so in the GameSir app by resetting the configuration file.
-
Click controller icon area on the GameSir APP main interface.
-
Click "Restore to default".
-
Click"Confirm", it will reset the profile of controller to factory settings.
The Gamesir-G8+ MFi faceplate features a magnetic and interchangeable design. After removingit, you can replace the thumbstick according to your personal preference. More replacementaccessories will be released in the future for gamers to choose from. Stay tuned.
SILICONE PAD REPLACEMENT
Gamesir -G8+ MFi features a swappable silicone pad design on the right side, allowing users tocustomize the pad thickness based on their device. When installing, ensure the thicker side of thesilicone pad faces upward and the thinner side faces downward.I. For devices without a protective case, use the thick silicone pads.2. For devices with a protective case, use the thin silicone pads.3. Ensure the edges of the silicone pads fit securely against the controller to prevent them fromfalling off.
Tutoriels avancés
Button Combination
Toggle Hair Trigger Mode
Toggle between enabling and disabling the hairtrigger mode.
Adjust Vibration Intensity
Increase/decrease the vibration intensity level.
Switch Mode
Switch between Android mode and XBOX mode.
- Only works when connected to a PC or Androiddevice.
Switch Layout
Swap the button values of A-B and X-Y. Thecontroller will vibrate to indicate when theswapping is successful.
Adjust Volume
Increase/decrease system volume.
Only works in Android mode.
Back Button Settings
Press and hold the M button and M1/M2 buttonsimultaneously until the corresponding direction'slight flashes white.
Then, press the button to be programmed tocomplete the setting.
Back Button Settings
During the setting process, if you press thecorresponding back button directly, its buttonvalue will be cleared.
FAQ
The G8+ MFi is compatible with iPhone, iPad and Android devices featuring a Type-C connection, with a length range between 125-215mm / 4.92-8.46in.
MFi (Made for iPhone/iPad) certification is an official Apple program that ensures accessories meet Apple’s performance and quality standards. The G8+ MFi has passed Apple’s strict certification process, guaranteeing reliable compatibility, stable connection, and safe performance with iPhone and iPad devices.
The G8+ MFi uses a built-in Type-C wired connection, ensuring ultra-low latency.
No, the G8+ MFi does not contain a battery as it is powered directly by your phone.
Yes, the G8+ MFi supports pass-through charging, allowing you to play and charge your device simultaneously.
The GameSir™ Hall Effect sticks use non-contact magnetic sensors to ensure they never wear down, preventing stick drift.
Yes. It features Hall Effect analog triggers for smooth, accurate input. You can switch to hair trigger mode by holding M + LT/RT.
Yes, you can easily swap the button layouts by pressing and holding M Button + A Button for 2 seconds.
Bientôt disponible...
Cet article vous a-t-il été utile ?
Dites-nous si vous l'avez trouvé utile ou si vous avez besoin de plus d'informations.