How to Use the GameSir X5S

1. Go to Switch main menu, then select Controller--Change Grip/Order to enter pairing status.
2. Press and hold Logo Button + Y Button until the indicator flashes rapidly in red, then wait for the connection.
3. A solid indicator indicates that the connection is successful.

• lf the connection is unsuccessful, press and hold Pairing Button re-enter pairing status.

1. Press and hold Logo Button + A Button until the indicator flashes rapidly in yellow.
2. Open the Bluetooth list on your phone, select "Gamesir-X5s", and click to connect.
3. A solid indicator indicates that the connection is successful.

• If the connection is unsuccessful, press and hold Pairing Button to re-enter pairing status.

1. Press and hold Logo Button + RB Button until the indicator flashes rapidly in yellow.
2. Open the Bluetooth list on your phone, select "Gamesir-X5s_G", and click to connect.
3. A solid indicator indicates that the connection is successful.

• If the connection is unsuccessful, press and hold Pairing Button to re-enter pairing status.

1. Press and hold Logo Button + Y Button until the indicator flashes rapidly in red.
2. Open the Bluetooth list on your phone, select "Pro Controller", and click to connect.
3. A solid indicator indicates that the connection is successful.

• If the connection is unsuccessful, press and hold Pairing Button to re-enter pairing status.

1. Use the included Type-C cable to connect, and the controller will automatically recognize the device.
2. After connecting, the controller will automatically switch to the corresponding mode and can be used normally. Press and hold View Button + Menu Button to switch between XBOX/Switch mode in sequence.

• For Switch: After connecting to the Switch via wired connection, go to “System Settings - Controllers and Sensors - Pro Controller Wired Communication” and enable this feature.

• This mode switching method is only supported when using a receiver or a wired connection. **

Sticks & Triggers

1. Hold View Button + Menu Button + Logo Button simultaneously to enter calibration mode.
2. The indicator will flash slowly in white during this process. At this point, push both sticks all the way to their limits and rotate them 2-3 times. Press both triggers fully down with appropriate pressure for 3 times.
3. Finally, press to exit. The indicator will return to its normal state.

Gyroscope

1. Place the controller on a stable, flat surface. Hold M Button + View Button simultaneously, and the gyroscope will automatically begin calibration.
2. During calibration, the indicator will flash in red and blue alternately.
3. When the indicator returns to its original light effect, the calibration is complete.

1. To reset the X5s, hold down the Home and View buttons simultaneously for 3 seconds. (This combination of buttons requires the phone to be connected.)

2. If you hold down the View + Menu + M keys for 3 seconds, all data will be cleared, and you’ll need to pair the device again. (This operation doesn’t require connecting to a phone.)

GameSir-X5s features a swappable silicone pad design on both sides, allowing users to customize the pad thickness based on their device. When installing, ensure the thicker side of the silicone pad faces upward and the thinner side faces downward.