How to Use the GameSir G7 Pro
For G7 Pro Mech White, Shadow Ember, Amber Flame, Plum Purple, Silver, Golden Ombre, Aimlabs Edition and Dragon's Dogma 2 Edition
Produktübersicht
Wichtigste Funktionen
- • The first XBOX-licensed controller with TMR sticks
- • Hall Effect/Micro Switch trigger stops
- • Four extra buttons
- • Fully software-customizable
Technische Daten
- • Working Platform: XBOX Series X|S, XBOX One, Windows 10/11, Android
- • Connection: Wired for XBOX; Wireless for PC and Android
- • Weight: 392 g / 0.86 lbs
- • Supported Software: GameSir Nexus app
Systemanforderungen
Windows PC
Windows 10/11 Wired, Wireless Dongle
XBOX
XBOX One, XBOX Series X|S Wired
Android
Android 8.0 or above Bluetooth
Erste Schritte
Short press the XBOX button to power on. While the controller is on, press and hold XBOX button for 5 seconds to power off.
When the battery level falls below 15%, the indicator will flash red. You can charge the controller via the Type-C port or the charging station.
The XBOX indicator shows the current connection status of the controller.
| Status | Indicator | Description |
|---|---|---|
| Reconnecting | Breathing | Attempting to reconnect to previously paired devices. |
| Pairing (Bluetooth Mode) | Running light effect | Press and hold the pairing button for 3 seconds to enter pairing mode. |
| Connected | Solid | Successfully connected. |
| Power off | Off | Controller powers off after 10 mins of inactivity in Bluetooth or 2.4G mode. |
Wired Connection
- Use the included Type-C cable to connect the controller to the XBOX console, then press the XBOX button briefly to power on.
- Once connected successfully, the XBOX indicator will remain solid.
- Only supports wired connection.
Wired Connection
- Use the included Type-C cable to connect the controller to your computer, then press the XBOX button briefly to power on.
- Once connected successfully, the XBOX indicator will remain solid.
Receiver Connection
- Insert the receiver into the computer.
- Switch the controller to the 2.4G mode, and press the XBOX button briefly to power on. Wait for the controller to connect.
- Once connected successfully, the XBOX indicator will remain solid.
Bluetooth Connection
- Switch the controller to Bluetooth mode, and press the XBOX button briefly to power on.
- Open the Bluetooth list on your phone, find the device named GameSir G7 Pro, and click to connect.
- If the connection is unsuccessful, press and hold the pairing button on the controller to re-enter pairing status.
Stick & Trigger Calibration
-
Set the trigger to analog mode, then press and hold View Button + Menu Button + XBOX Button starts flashing slowly.
-
Ensure that the LT & RT triggers and the left & right sticks are not being touched. ThenPress the A button. The XBOX indicator will turn off.
-
Press the LT & RT triggers to their maximum travel for 3 times. Rotate the left & rightsticks to their maximum angles for 3 times. Press the A button. A solid light on the XBOX indicator indicates that the calibration is complete.
Gyro Calibration
-
Place the controller horizontally on a flat surface, then hold the M Button + Share Button buttons for 3s seconds.
-
At this point, the XBOX Button button will flash orange and white alternately rapidly.
-
Calibration is complete when the XBOX Button stops flashing.
- Note: Gyro function only works on PC.
-
If the controller encounters issues such as being unable to power on or off properly, you can use a small object similar to the size of a paperclip to press the Reset button inside the circular hole on the back of the controller. This will force the controller to power off.
-
If the controller encounters issues such as being unable to power on or off properly, you can Hold View Button + Menu Button + M Button till the logo Button blink. This action will reset the profile and all the settings of the controller.
Erweiterte Tutorials
Extra Button Mapping
The G7 Pro features four extra buttons (R4/L4 back button and R5/L5 mini bumper), allowing you to customize your controls.
Profile Switch
- M + Y = Default Profile
- M + B = Profile 1
- M + A = Profile 2
- M + X = Profile 3
Enable / Disable Hair Trigger Mode
Hold the M + LT / RT for 2s
Volume Adjustment
Adjust Master Volume
Hold the M button + D-pad Up/Down (11 levels in total)
Note: You'll hear a beep when reaching the maximum or minimum level.
Adjust Game/Voice Balance
Hold the M button + D-pad Left/Right
Left: increase game volume, decrease voice volume. Right: Decrease game volume, increase voice volume.
Note: You'll hear a beep when reaching the maximum, middle, or minimum level.
Mute Function
Press the Mute button to turn on the mic mute function (indicator turns red). Press it again to turn it off (indicator turns off).
Note: When the Mute function is turned on, hold the Mute button to temporarily turn it off. Release the Mute button to turn it back on.
FAQ
The G7 Pro supports XBOX Series X|S, XBOX One, Windows 10/11, and Android.
The G7 Pro is equipped with tri-mode connectivity:
- Wired for XBOX
- 2.4 GHz for PC
- Bluetooth for Android
The G7 Pro is equipped with the latest GameSir Mag-Res™ TMR sticks, combining the precise performance and low power consumption of traditional electromagnetic sticks with the exceptional durability of Hall Effect sticks, offering gamers a smoother, more responsive, and anti-drift experience.
Yes, the G7 Pro has precision Hall Effect triggers with clicky Micro Switch Trigger stops. It also includes a Hair Trigger Mode, activated by holding M + LT/RT.
The G7 Pro has 4 rumble motors, also for wide grip and trigger, providing immersive haptic feedback.
The G7 Pro has 4 mappable buttons: 2 mini bumpers (R5/L5) and 2 lockable back buttons (R4/L4).
The switches allow gamers to Disable the back buttons to prevent symmetrical inputs.
This G7 Pro supports quick switching between connection modes for added convenience.
Yes, the G7 Pro supports a 1000Hz polling rate via PC (via both wired and 2.4G connections).
Charging Station x 1 Receiver x 1 D-pad x 2 Cable Retainer x 1 3m Type-C Cable x 1
Yes, the G7 Pro features a gyroscope with mapping support (PC only).
The G7 Pro is supported by the GameSir Nexus app, offering adjustable fine-grained settings, stick curve adjustments, and button re-mapping for players to set up the controller for their own preferences.
Yes, the G7 Pro supports 3.5mm audio output via both wired and 2.4G wireless connections.
Yes, it features a 3-part split magnetic faceplate design. And the G7 Pro is compatible with faceplates from the previous G7 series. However, the G7 Pro faceplate is not compatible with older G7 series controllers (G7, G7 SE, and G7 RS).
Demnächst verfügbar...
War dieser Artikel hilfreich?
Lassen Sie uns wissen, ob Sie die Informationen hilfreich fanden oder mehr brauchen.