How to Use the GameSir G8 Plus
The most premium mobile controller for Bluetooth connection.
Produktübersicht
Wichtigste Funktionen
- • Console-grade controller quality
- • Anti-drift Hall Effect sticks
- • Precision-tuned Hall Effect analog triggers
- • Max compatible length 215mm
Technische Daten
- • Working Platform: Switch, Mobile Devices, PC
- • Connection: TBluetooth for mobile devices, Wired and Wireless Dongle for PC
- • Weight: 314 g
- • Supported Software: GameSir app
Systemanforderungen
Android
Android 8.0 or above Bluetooth
Switch
Switch/Switch 2 Bluetooth
Windows
Windows 10/11 Wired
Erste Schritte
- Long press Home button for 1 second to power on.
- Long press Home button for 5 seconds to power off.
Extending the controller automatically powers on. Folding it automatically powers off (except in G-Touch mode).
The Home indicator shows the current connection status of the controller.
| Status | Indicator | Description |
|---|---|---|
| Pairing | Flashing | Controller is discoverable and ready to pair. |
| Connected | Solid | Successfully connected. |
| Reconnecting | Breathing | Attempting to reconnect to previously paired devices. |
Switch the controller mode based on your target platform.
| Mode | Indicator Color | Platform |
|---|---|---|
| Android Mode | Yellow | Android |
| Other Devices Mode | Blue | Android / Other Devices Mode |
| Switch Mode | Red | Switch / Other Devices Mode |
| G-Touch Mode | Cyan | GameSir App |
Bluetooth Connection
- Switch to Android mode, then long press Home for 1 second to power on.
- Open Bluetooth settings on your phone, find "GameSir G8 Plus" and tap to connect.
- The indicator will turn solid yellow when connected.
- lf the connection is unsuccessful, press and hold Pairing Button re-enter pairing status.
Bluetooth Connection
- Switch to Other Devices mode, then long press Home for 1 second to power on.
- Open Bluetooth settings on your Devices, find "GameSir G8 Plus" and tap to connect.
- The indicator will turn solid blue when connected.
- lf the connection is unsuccessful, press and hold Pairing Button re-enter pairing status.
Bluetooth Connection (G-Touch Mode)
- Switch to G-Touch mode, then long press Home for 1 second to power on.
- Open the GameSir App and follow the on-screen instructions to connect.
- The indicator will turn solid cyan when connected.
- lf the connection is unsuccessful, press and hold Pairing Button re-enter pairing status.
Bluetooth Connection
- Switch to Switch mode, then long press Home for 1 second to power on.
- On your Switch, go to Controllers > Change Grip/Order and pair the controller.
- The indicator will turn solid red when connected.
- lf the connection is unsuccessful, press and hold Pairing Button re-enter pairing status.
Wired Connection
- Connect the controller to your device using a USB-C cable.
- The controller will automatically power on and connect.
Note: For XBOX/Switch/Other Devices Mod switching in wired mode, refer to the mode switch on the controller.
When extended, only the right battery charges via Type-C. When folded, both left and right batteries charge simultaneously.
Stick & Trigger Calibration
- Connect your phone to the controller. Hold the "-"(View Button) + "+"(Menu Button) + Logo button for 2s until the Home Indicatorand Mode Indicator blink white slowly, indicating that the calibration mode is entered.
- In calibration mode, follow below steps to complete calibration:
- a) Rotate the sticks at their maximum angles 3 times and let them return to the initial position naturally.
- b) Press the triggers to their maximum travel 3 times and let them return to their initial position naturally.
- Press o o to complete and exit the calibration mode.
- Calibration should be kept at a constant speed and gently operated to avoid errors whilecollecting data.
If the sticks and triggers can be used normally, please do not calibrate.*
Gyro Calibration
- Place the controller horizontally on a flat surface, then hold the Capture Button + M Buttonfor 3s seconds.
- At this point, the Logo Button will flash red and blue alternately.
- The home button will return to the mode color to indicate the calibration is complete.
-
To reset the G8+ to its default settings, hold down the Home and Menu keys simultaneously for 3 seconds. This function requires the phone to be connected to a Wi-Fi network. All settings will be restored to their factory defaults after the reset.
-
If you hold down the View + Menu + M keys for 3 seconds, all data will be cleared, and you’ll need to pair the device again. (This operation doesn’t require connecting to a phone.)
Erweiterte Tutorials
Extra Button Mapping
Customize button mapping via the M button combinations or through the GameSir App.
Volume Adjustment
Home + D-pad Up/Down (Android and Switch mode only)
Enable / Disable Hair Trigger Mode
Hold the M + LT / RT for 2s
Swap Button Value of A-B and X-Y
M + A (long press 2 seconds) to swap A↔B and X↔Y values.
Enable / Disable Turbo Function
M + Target Button to toggle Turbo. Four speed levels: 8Hz / 12Hz / 20Hz / Off
Vibration Intensity
M + D-pad Up/Down 5 intensity levels.
FAQ
Switch, iOS, Android (phones 120-215mm), and PC.
Bluetooth for mobile devices. Wired or wireless adapter for PC.
Bluetooth 5.3. Switch <0.013s, iOS/Android <0.026s.
1000mAh total (500mAh left + 500mAh right).
Hall Effect sticks, anti-drift technology.
Yes, precision Hall Effect analog triggers.
Yes, asymmetric grip vibration.
Yes, in Bluetooth mode the phone case can remain on.
M+A to swap AB/XY. Full remapping via app. Panels, stick caps, and face buttons are detachable.
Demnächst verfügbar...
War dieser Artikel hilfreich?
Lassen Sie uns wissen, ob Sie die Informationen hilfreich fanden oder mehr brauchen.