Tutorials:How to use T7 Pro Wireless
BASIC FUNCTION INTRODUCTION
CONNECTION STATE
| Xbox Indicator | Description |
| Breathing | Reconnecting State *It can connect to previously paired devices. |
| Flowing Light Mode (Surround FlowingEffect) |
Paring State (Bluetooth Mode) *In this state, it can be discovered and paired with devices. |
| Solid | Connection Successful |
| Off | Power-off State *The controller will enter standby state after 10 minutes ofinactivity in 2.4G or Bluetooth mode. |
OPERATING INSTRUCTIONS
| Description | Operation |
| Power On/off | Short press the Xbox button to power on. While powered on,press and hold the Xbox button for 5 seconds to power off. |
| Pairing | In Bluetooth mode, press and hold the pairing button for 2seconds to enter forced pairing mode. |
| Preset Configuration Switching |
M+Y Configuration 1 M+B Configuration 2 M+A Configuration 3 M+X Configuration 4 |
| Hair Trigger Mode |
Enable/disable hair trigger mode Press and hold the M button + LT/RT button for 2 seconds |
| Light Effects Switch | Switch among 4 light effects. M + Left Stick's Left/Right. *The setup will still be saved after restart. 
|
| LED brightness |
Increase/Decrease LED brightness.5 levels, default is the brightest. M + Left Stick's Up/Down *The setup will not be saved after restart. |
| Trigger Mode Switch | Switch between long and short trigger pulls by togglingtrigger gear switch. |
| Low Battery | When the battery is below 15%, the Xbox indicator will flash red. |
| Charging | You can charge the controller via the USB-C port or the charging station. |
WINDOWS CONNECTION TUTORIAL
WIRED CONNECTION
1. Use the included UsB-C cable to connect the controller to your computer, then press the
Xbox button briefly to power on.
2. Once connected successfully, the Xbox indicator will remain solid.
RECEIVER CONNECTION
1. Insert the receiver into the computer.
2. Toggle the controller's mode switch to the 2.4G mode, and press the Xbox
button briefly to power on.
Wait for the controller to connect.
3. Once connected successfully, the Xbox indicator will remain solid.
ANDROID CONNECTION TUTORIAL
BLUETOOTH CONNECTION
1. Toggle the controller's mode switch to the Bluetooth mode,and press the Xbox button briefly to power on.
2. Open the Bluetooth list on your phone, find the device namedGameSir-T7 Pro, and click to connect.
3. Once connected successfully, the Xbox indicator will remain solid.
If the connection is unsuccessful, press and hold
the paring button on the controller tore-enter pairing status.
XBOX CONNECTION TUTORIAL
WIRED CONNECTION
1. Use the included USB-C cable to connect the controller to the Xbox console, then pressthe Xbox button briefly to power on.
2. Once connected successfully, the Xbox indicator will remain solid.
* Only supports wired connection.
RECEIVER CONNECTION
1. Insert the receiver into the Xbox console.
2. Toggle the controller's mode switch to the 2.4G mode, and pressthe Xbox button briefly to power on. Wait for the controller to connect.
3. Once connected successfully, the Xbox indicator will remain solid.
VOLUME ADJUSTMENT
EXTRA BUTTON SETTING
Set the extra button value: Press and hold the M button + L4/R4 button, and the Xboxindicator will start flashing slowly. Press the button you want to map to the extra button,and the Xbox indicator will return to a solid light, indicating that the extra button setting iscomplete.
* Within the setting mode, pressing the corresponding extra button will clear its button value.
